Dura-Plate 235 Multi-Purpose Epoxy
is a modified epoxy phenalkamine, formulated specifically for immersion
and atmospheric service in marine and industrial environments. Dura-
Plate 235 provides exceptional performance in corrosive environment, and
can be applied at temperatures as low as 0°F.
Self-priming, Low temperature applicationSurface tolerant - damp surfaces, Provides salt water and fresh water immersion resistance, Cures at temperatures as low as 0°F
This stuff covers great. These images are just 1 coat. I will put on a
second coat after a cure of 48 hours. Very forgiving, cures a little
slower below 32 degrees but nothing that will throw you off. Bonds
well, hard as nails. The only down side is it is VERY expensive. Almost
$80/gallon. I have gone through 3 gallons in this refit. But as a
primer coat I don't know if it can be beat. We will see in the coming
years if it holds up well.
No comments:
Post a Comment